Meowzer's LED build

2quills

Well-Known Member
Quote:
Originally Posted by meowzer http:///t/387353/meowzers-led-build/840#post_3453582
WELL I AM NOT using the controller.....it seems every few minutes the time just stops.....and we are not gonna hook it up for it to not work right
so we are going with the pot for the moonlights like our original design planned for......
So the timer just stops...does the time keep resetting itself or are you saying it works, stops, works stops...? I'll send a message to the guy who designed these and see if he has any input on whats going on with it.
 

meowzer

Moderator
Quote:
Originally Posted by 2Quills http:///t/387353/meowzers-led-build/860#post_3453592
So the timer just stops...does the time keep resetting itself or are you saying it works, stops, works stops...? I'll send a message to the guy who designed these and see if he has any input on whats going on with it.
TIme just stops.....it is now 4 minutes behind because when it stops,.....obviously it uses the time
We decided to not use it at this time though.....we are not going to hook it up with a question about it working.....I'm really getting tired of taking this light down.....LOL
We (he) is now working on the moonlights
 

meowzer

Moderator
OK....Moonlights are on.....we are waiting for them to go off
tick tock.......ALTHO....Danny found a bad wire.....(maybe) SOOOOO maybe we will be lucky...and they will not go out
Now we decide how long to wait....BAHAHAHA.......
 

2quills

Well-Known Member
Quick question for MR. BTLD: The controller that you sent Lois, is this the one that you had to upload the new sketch for in order to reverse the modulated signal? Or was that the current one that you have now?
Quote:
Originally Posted by meowzer http:///t/387353/meowzers-led-build/860#post_3453604
....Danny found a bad wire.....(maybe) SOOOOO maybe we will be lucky...and they will not go out
 

meowzer

Moderator
WELL.....after almost an hour.....the moonlights have remained on
pretty confident if they were going to shut off....they would have a long time ago
SOOOOOOO.....now we put it back up again......stay tuned..........................
 

meowzer

Moderator
THEY'RE ON!!!!!!!!!!!!!!!! Now I have to wait a couple of minutes for the blues to go out.....and see if I need to turn them up or down.....
fingers crossed.....so far so good
 

meowzer

Moderator
THEY ARE BEAUTIFULLLLLLLLLLLLLLLLLLLLL....so far so good......I think we are good to go....FINALLY...
They may be a little bright......we have them ALMOST as low as they can go....LOL....I don't want the fish to get confused
Itried to take a picture, BUUT I can't get the camera to cooperate w/o flash.....and with the flash....well it lightens up the whole thing
 

meowzer

Moderator
Thanks guys......and sorry Krista :(
BUT I am pretty happy right now.....FINALLY my lights are working 100% WOOO HOOOOOOO
 

meowzer

Moderator
Quote:
Originally Posted by 2Quills http:///t/387353/meowzers-led-build/860#post_3453654
Very good, Lois. And kudos to Danny for finding the bad wire.
Thanks Corey......I wish I could show you guys what it looks like.....it's amazing....Danny is still not 100% sure it was the wire compared to the driver...since we used the new driver...BUT all I know is it works,......YIPPPPPEEEEEE
Now all I have to do is take care of my algae issue....lol...and all will be grand
 
Top