Search results

BUMP Please.

Levels: Nitrate 0 Phos 0 Calcium 380 Salinity 1.025 PH 8.2 DKH 7 Temp 79 degrees What do you guys think, putting everything in perspective now?

Befofre or after you look at CPR check out Lifereef's overflow. They are suppose to be A LOT better. If you call the company and speak to the owner (he answers the phone, weird right) he will tell you he loves CPR because everyone replaces the CPR with the Lifereef. Check it out.

OK thanks. I will keep you guys posted. Thank You.

. I would like to get this ASAP in case it has to cycle

Yes, I do 10% every week. I actually woke up today and saw something eat a lot of it (hair algae). So weird

When you get it, how about after you put it all together, you send a pic. I'm curious how much of this stuff I didn't have to make. Yeah he is sending me a return pump too. He said he will be sending c-clamps, the flex hose, fittings for the pump and overflow and I ordered the silencer (just...

OK got my refugium tank ready and the pump and overflow is on its way. Do I have to cycle this refugium tank? If so how long and what kind of process is it? Can you guys give me some pointers. Will be using LR and LS. Do I filter it for a few days before hooking it up? Let me know thanks.

All my levels are pretty near perfect. I will test them tomorrow and post them. My Phosphate level is 0.

Originally Posted by TomToro You da Man! Those are some clean silicone lines. Make sure you water test it first with a hose in the bathtub to see if the baffles hold. Make sure the return pump matches the overflow gph at the height you'll be returning up to. You might also want to plumb a...

Originally Posted by earlybird Can you describe the gluing process? How did you hold the baffles while you siliconed? My magdrive 7 needs about 5 inches for the return section. What kind of skimmer do you have? Actually I just put the tank on its end and measured 1" apart. I used Fluted...

Hello?

I just ordered a Lifereef overflow and he suggested a Henri PS7 pump which puts out 500 gph at 4 ft. which is how high my floor to top of tank is. We will see.

46 gallon bow front. Water source is all R/O. 2 aquaclear 20 powerheads. Redsea HOB skimmer and canister filter Fluval 305.

Ok, the tank has been up for about a month. Diatoms are not getting worse they are just not going away on the bed. It seems one area is worse than others but it is just not going away. It was pretty bad at one point but nothing that looked horrible. On top of the bed is hair algae too that...

yeah, i didn't order my overflow yet, i have to wait n see. does it look like it would fit? That depends on where I set my overflow right? I'm new at this!

OK, heres the deal. Its homemade and I am asking for some feedback on it. Its a 10 gallon refuge for a 46 gallon tank. Where the water dumps into (left side) (from the DT) there is 2 5/8 inches where im thinking I will put my HOB skimmer. Then the baffles are placed 1 down 1 up and one down...

OK, heres the deal. Its homemade and I am asking for some feedback on it. Its a 10 gallon refuge for a 46 gallon tank. Where the water dumps into (left side) (from the DT) there is 2 5/8 inches where im thinking I will put my HOB skimmer. Then the baffles are placed 1 down 1 up and one down...

in my canister I run the filter pads, phosguard, and chemi pure. The salt I use is tropic marine. My levels are always pretty much perfect. Try the Chemi pure in your canister.

I might be getting the lifereef. The 700 gph. Think this is too big?